16 x S2 / S3 Silver Wheel Bolts 32mm Thread

Be the first to write a review

These are 17mm HEX headed wheel bolts, about 6mm longer than the standard OE Torx / star type countersunk head bolt that Lotus use.

Ideal if you are using a wheel spacer (up to 5mm) or a wheel with a slightly thicker hub such as the OZ wheel on a standard S2 set up.

Very strong and have the correct 60 degree taper seat that the S2 / S3 Elise and the S2 Exige require.

These bolts have 17MM hexagon heads and will require a thin wall 17mm socket shown here or in related products below to fit them.

M12 x 1.5mm pitch thread with a 60 degree taper seat.

Dimensions
A 17.00mm Hex
B 23.00mm
C 12.00mm x 1.5mm Pitch
D 12.00mm
E 25.00mm
F 56.00mm
G 60 Degree Taper
Thread Length 32.00mm