Hubcentric Spacers S2 / S3

The strongest wheel spacers available.

Specially designed for use on the S2 / S3 Elise to enable fitment of the MK2 Exige rear wheels which have a 20mm offset difference.

The S2 Exige front wheels have the same offset as the standard car so only the rears are required.
They can also be used to widen the front or rear track on the S2 / S3 Elise or S2 Exige if required.

A lot of engineering thought has been put into these adaptors; they have a precisely machined inner ring that fits snugly onto the main "nose" of the drive flange and a similarly machined protrusion creating a perfect fit to the inner wheel hub, this is very important for strength and safety.

These utilise the proper fitment of 8 x High Grade 12.9 steel studs permanently fixed to 2 x 20mm thick aircraft spec alloy spacer rings.

They are easy to fit and are supplied with 8 x 12.9 grade steel caphead bolts, enabling fixing to the OE steel hub.

A further 8 x 17mm zinc plated hex head wheel nuts are supplied so the wheels can still be easily fitted and removed from the vehicle.

Thin wall Hexagon Headed socket is shown below in the related products section

SUPPLIED IN PAIRS.